What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 04:00

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
For this case there are devices called Metal oxide varistors (MOV).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Former Player Gives Definitive Verdict on Knicks Firing Tom Thibodeau - Athlon Sports
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Barnstars:
Why do guys have better skin than women even though women use more product?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Gotham TV Awards: ‘Adolescence,’ ‘The Pitt’ & ‘The Studio’ Among Big Winners - Deadline
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
The bolt then partially travels down the line to your home.
He then asserts :
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Fed’s Waller sees path to multiple interest-rate cuts this year - MarketWatch
This is where this question deviates from being a 'generic' question, and becomes more specific.
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Are you happy that soon we will never hear from Kamala Jones again?
a photo is worth a thousand words.
One is “what exactly is in a ‘surge protector’ ? ”
He then describes the function of a fuse.
Analyst sets date when Nvidia stock will hit $200 - Finbold
the problem then depends on "how fast does the fuse operate?".
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
One
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What is lightning?
But… the neutral is now “floating” because of the 1 ohm resistance.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–10[John johnson John Johnson ]
[image of Common-mode choke]
It also is a device that limits the change in current flow.
These are simplified answers to the original question, and does not change anything I wrote above.
what exactly is a ‘surge’ protector?
A fuse is a non-resetable over current circuit protector.
First Sentence:
Why do almost all the girls on Quora look beautiful?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then describes Rainy Season and Lightning.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
How do I change a truck’s engine oil?
This device then solves the entire problem.
This one hit behind the barn.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What are the most meaningful Jewish jokes that reveal insights about Jewish culture?
A circuit breaker is similar, but is resettable.
But it can get overloaded, and no longer works.
This is 'the assistant's answer'
There are three different concepts here that are getting confused.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
nine
2024–10–16 [ OO OLAOYE OYEBODE ]
At least they know the answer if they wanted it.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Now when you have a certain ac resistance, then a current flows in a loop.
An AC voltage/ current source, and an ac inductive load.
[old diagram got deleted by accident]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
(Dc diagram shown, AC is similar).
2024–10–14 [Omar Gharbi Omar Gharbi ]
There are two important concepts here.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The third is lightning and “how it gets conducted into a home.”
Upvotes:
but I think this circuit , shows a few more pieces.
This is where the MOV conducts again, and dissipated the energy.
The other is “what does a “fuse” do?”
What does a fuse do?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
I post the exact comment here.
Edit 2024–10.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At one ohm, the resistor has a maximum of 1 watt power.
Here is a simplified AC power diagram.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but this device (an Inductor) … impedes the rapid changes in the current.
So, the voltage could go up to 500 volts, and the fuse will not open up.
so, what happens?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
It seems Mohan does not understand the difference between a comment and an Answer.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
In schematic diagrams this is the symbol for a fuse:
eight